DeWalt cordless gas nailer C5 Trak-It concrete nailer for C5 concrete nails

• Gas nailer for drywallers, contractors, electricians and plumbers.
• The lightest and smallest tool in its class, resulting in less user fatigue. The C5 has excellent ergonomics and is extremely maneuverable
• The 112 joules impact force of the device even allows it to be used in very hard concrete
• The small size of the device was achieved thanks to the new, patented combustion chamber
• Adjustment wheel for easy adjustment of the setting depth
• Best dust protection - less maintenance thanks to new suction filter with metal grid
• Smart fan: fan time is adapted to the appliance and the ambient temperature
• Maintenance indicator light
• Magazine change with a single movement
• Built-in dust protection
• Ergonomic trigger for easy working

DEWALT offers the compact and powerful C5 TRAK-IT gas nailer for serial fastening of cable ducts, mounting straps, cable and pipe clamps in the HVAC and electrical sectors, as well as for fastening metal stud frames and creating sliding ceiling connections in drywall construction. With an impact force of 105 joules, it drives nails or nails in conjunction with attached pipe clamps or rondelles into a variety of fixing substrates including steel, concrete, solid and perforated brick.

Up to 5.700 nails with one battery charge

The driving depth can be easily adjusted and operation is simple and safe: as soon as the nailer tip is pressed against the material and the trigger is pressed, a nail is fired - the device can drive up to 5,700 nails with one battery charge. The magazine can be changed quickly and without tools using a bayonet catch. This allows the magazine to be released in a user-friendly way, even if nails are jammed. The C5 TRAK-IT gas nailer is also equipped with numerous other functions that ensure a high level of safety, utility and convenience. Because it is low-vibration and low-recoil, this nailer is gentle and virtually fatigue-free to work with, especially as the weight of the tool is well balanced. A metal filter provides highly effective dust protection - this is not only ideal for overhead work, but also extends maintenance intervals. The intelligent fan for cooling the motor also contributes to a long service life, as it adjusts the running time of the fan depending on the ambient temperature. When used on ladders or scaffolding, the gas nailer can be attached to the belt using its suspension hook.

For standard galvanized nails and XH nails

The C5 TRAK-IT gas nailer is designed for galvanized nails from 15 to 40 mm in length and a shank diameter of between 2.6 and 3.7 mm. The C5 TRAK-IT system also has ETA approval for XH nails from 22 to 27 mm. XH nails feature special hardening and a stepped shank design for optimum penetration, allowing them to be driven into exceptionally hard concrete.

The C5 TRAK-IT gas nailer from DEWALT is available in two versions: with a long (DDF5110500) or short magazine (DDF5120550), each including two spare batteries, charger and carrying case for EUR 1,149 (RRP plus VAT). Gas cartridge, spare battery, pipe clamps, batten and insulation washers, TRAK-IT nails (15-40 mm) and XH nails (17, 22 and 27 mm) are optionally available.

Further fastening solutions from DeWALT
Since September 2014, DEWALT has been offering a range of fastening systems in addition to power tools and accessories, which is divided into the areas of mechanical fasteners, light-duty fasteners, chemical fasteners and direct mounting. The fastening systems come from the Powers Fasteners range, a specialist in fastening solutions that the DEWALT parent company acquired at the beginning of 2013. DEWALT fastening solutions are developed in accordance with international testing guidelines by a team of experienced engineers and are subjected to both internal and external testing and inspection procedures. Therefore, many anchoring products are certified according to ETA and carry the CE mark or fulfill other test guidelines or test criteria such as fire resistance, the General Building Approval and Acceptance Criteria (AC) of the International Code Council (ICC ES). Some fastening systems are also approved for use under seismic load.

C5 TRAK-IT gas nailer at a glance:

-  105 joules for setting in the hardest concrete and steel
-  for nails from 15-40 mm / Ø 2.6-3.7 mm
-  adjustable driving depth
-  up to 5.700 nails with one battery charge
-  Adaptation of the blower to the ambient temperature
-  Low vibration and recoil
-  Metal filter for highly effective dust protection
-  Quick magazine change with bayonet lock

About DEWALT Germany
DEWALT has been developing and manufacturing high-quality power tools and accessories for professional users for more than 90 years and stands for performance, innovation and reliability. Many thousands of professional tools of this brand - since the early nineties in the typical yellow and black design - are reliably and successfully in use on construction sites all over the world. All machines are designed for the most extreme conditions, durability and, above all, the safety of the end user.  As a brand for professional users, DEWALT is sold exclusively through qualified specialist dealers. As a full-range supplier, DeWALT offers its customers a wide range of professional fastening solutions in addition to power tools and accessories