Products from en Produkt

Gerät wurde zerlegt, gereinigt, überprüft und nach Befund repariert. Alle defekten Teile wurden ersetzt.

Universally applicable metal insulation board holder made of galvanized sheet steel. For fastening pressure-resistant insulation materials such as sandwich panels, rock wool, wood wool panels, Wedi panels, etc. Simply drill + hammer in =...

Universally applicable metal insulation board holder made of galvanized sheet steel. For fastening pressure-resistant insulation materials such as sandwich panels, rock wool, wood wool panels, Wedi panels, etc. Simply drill + hammer in =...

Universally applicable metal insulation board holder made of galvanized sheet steel. For fastening pressure-resistant insulation materials such as sandwich panels, rock wool, wood wool panels, Wedi panels, etc. Simply drill + hammer in =...

Tool type Manual Tool weight 4.4 kg Tool width 699 mm Length 127 mm Height 152 mm Magazine capacity (max) 40 RING 11 fastener series: Back (mm) 39 (Min) 39 (Max) Open size (mm) 26

Tool type Manual Tool weight 4.4 kg Tool width 699 mm Length 127 mm Height 152 mm Magazine capacity (max) 40 RING 11 fastener series: Back (mm) 39 (Min) 39 (Max) Open size (mm) 26

Combi gas nailer for wood on wood applications (roofers and contractors) Suitable for full round head 20˚ nails on plastic strips, lengths 51mm to 90mm Suitable for full round head anchor nails 20° plastic strips. Lengths 40-50-60-65mm...

Industrial device for cardboard, film, upholstery, etc. in series production. Product advantages Long magazine Loads from below Ergonomic rubber handle

Cut-off wheel suitable for angle grinders, for dry cutting, sintered, TURBO segmented Area of application: for general concrete products on construction sites, clinker, bricks, exposed aggregate concrete, roof tiles

Lithium-ion battery press with fully automatic stress relief Infinitely adjustable feed speed Partially rubberized handle and trigger Integrated power LED work light Pressing force: approx. 290kg Scope of delivery: hard case, quick...

Nails with ballistic tip suitable for medium load applications with attached pipe clip Galvanized Also suitable for other brands of tools, including Spit®, Hilti®, Würth®, Berner®

These strip nails are collated like the 34° strip nails. The nails meet the requirements of Eurocode 5 and the CE standard. These gas cartridges are suitable for Tjep gas nailer GRF 34/100 Excellent (63-105mm) Package contents 2200 nails...

Technical data Diameter 3.10 mm Nails / Coil 200-400 pieces Finish NK (galvanized) Ring (groove) Application examples House construction, packaging Packaging content 3600 pieces

The 34° strip nails, also known as D-head or D-head strip nails, are collated at an angle of 34°. They have a head that looks like a D and are collated with a paper adhesive strip on the nail shank. They can be processed in all strip...

For concrete Thread length (metric thread): 10 mm Thread type x nominal diameter: M6 Shank length: 12 mm Shank diameter: 3.8 mm Surface: Galvanized Thread type: Metric thread Nominal diameter: 6 mm Packaging content 100 pieces

For concrete Thread length (metric thread): 10 mm Thread type x nominal diameter: M6 Shank length: 22 mm Shank diameter: 3.8 mm Surface: Galvanized Thread type: Metric thread Nominal diameter: 6 mm Packaging content 100 pieces

For concrete Thread length (metric thread): 10 mm Thread type x nominal diameter: M6 Shank length: 27 mm Shank diameter: 3.8 mm Surface: Galvanized Thread type: Metric thread Nominal diameter: 6 mm Packaging content 100 pieces

Die Nägel sind geeignet für: Die Befestigung auf Mauerwerk, Kalksandstein, Holz oder Beton Befestigung von U-Profilen Befestigung von CW-Profielen an Decke, Wand und Boden Befestigung von Wandwinkelprofielen, Mattenbefestigung...

Fix anchor with ETA approval Option1 for a wide range of applications The fixed anchor is suitable for a wide range of fixings as it can be used in cracked and non-cracked concrete . Low force required for setting, easy installation....

Fix anchor with ETA approval Option1 for a wide range of applications The fixed anchor is suitable for a wide range of fixings as it can be used in cracked and non-cracked concrete . Low force required for setting, easy installation....

The 34° strip nails, also known as D-head or D-head strip nails, are collated at an angle of 34°. They have a head that looks like a D and are collated with a paper adhesive strip on the nail shank. They can be processed in all strip...

Nails with ballistic point and roundels suitable for applications on steel Galvanized Also suitable for other brands of tools, including Spit®, Hilti®, Würth®, Berner®

Fix anchor with ETA approval Option1 for a wide range of applications The fixed anchor is suitable for a wide range of fixings as it can be used in cracked and non-cracked concrete . Low force required for setting, easy installation....