34° strip nails 2.8x80mm ring blank gas for Paslode IM350 Tjep GRF 34/90 Hitachi Senco BeA 2.0M

The 34° strip nails, also known as D-head or D-head strip nails, are collated at an angle of 34°.

They have a head that looks like a D and are collated with a paper adhesive strip on the nail shank.

They can be used in all strip nailers that process strip nails at an angle of 34°.

These gas cartridges were the first on the European market to receive EU-wide approval for pressure vessels. 

As a testing institution, DEKRA has intensively tested the manufacture and the product and recommended approval.

These gas cartridges can be used for all appliances with a red angle valve and a length of 165 mm. 

Compared to the competition, the gas cartridges are tested for a pressure of 25 bar and filled with 18 bar. Whereas the competition may only have a maximum of 12 bar. (Powers patent)

The independence of temperature once again puts them in the foreground - because this also solves the problem of cold.

The basic body of the gas cartridges is the same. 

The lubrication is also completely contained in the gas cartridge.

You can recognize the 18 bar gas cartridge by the inlet valve at the bottom of the cartridge. Only by  this filling variant is an 18 bar filling possible.

Scope of delivery 2000 nails incl. 2x gas