100 Insulation dowels 120mm Insulation fastener for concrete nailer TGT IS200 ISO GT/C-ISO-200 P

100 insulating panel dowels with steel nail with permanently attached plastic cap 60mm

When fixing ETICS, insulation boards are usually 
bonded to the façade and then dowelled. 
The dead load of the system is transferred to the wall 
via shear forces. High-quality plate anchors mounted through the insulation 
generate additional contact pressure via their rigid anchor plate.
Simple anchor selection for a secure hold in any building material. 
And with minimum anchoring depth and maximum performance. 
Performance up, total costs down! For permanently beautiful energy-saving façades.

• Fixing insulation to facades
• Fixing insulation to ceilings
• Fixing insulation to external basement walls
• Fastening rock wool insulation
• Fastening EPS insulation 

No more drilling, save valuable working time

• Extremely fast insulation fastening system: up to five times faster than conventional methods
• High-strength fastener with low failure rate
• Crumple zone: no crushing of the insulation material.

• The fast alternative:  

  Gas pressure technology offered the opportunity to test one of the fastest fastening techniques. Previously used primarily in drywall construction, it has undergone considerable further development in recent years and has now also become established for new applications in the construction industry.

  The developed ISO gas pressure device was chosen for an initial test. It is designed for fastening light to medium insulation materials to concrete substrates. Various fixing points were tested directly on the building for their suitability and fixing quality.

  1. Attach the insulating mandrel to the device

  2. Press on the insulating panel

  3. Press down

  Three hand movements and the thermal insulation boards hold securely, reliably and permanently.